MARA eKemahiran - Halaman Utama

How To Install Windows Server 2003 - Part 2

http://zcomby.googlepages.com/ http://zcomby.blogspot.com

LAB 1. INSTALLING WINDOWS SERVER 2003

This section requires you to work in groups (a group comprises two students) using two computers. One computer will act as a server for your network. The other computer will act as a client computer.

It is important that you perform the steps in the suggested order. Some steps are very dependent upon the earlier steps having been successfully completed.

Preliminary SetupBefore you start install Windows Server 2003, you have to make sure your PC have the following configuration :

Computer: Pentium D 2.8GHz, 512MB RAM, 80GB Disk

Partition 1: C Drive, formatted as NTFS, 20GB, installed with Windows XP Professional SP2. (User name = Administrator, password = student.)

Partition 2: D Drive, formatted as FAT32, 20GB, free space. Used to install the Windows Server 2003 software

Partition 3: E Drive, formatted as FAT32, 20GB, free space.

Partition 4: F Drive, formatted as FAT32, 20GB, free space.

PREPARING TO INSTALL WINDOWS SERVER 2003
Work in pairs, and install the Server first. You will need two computers, preferably side by side. You will be performing a CD-ROM install.

The computer will need a name. This will identify the computer on the network from other computers, so must be a unique name. Please use the computer name assigned by your instructor. Your network will also require TCP/IP network details. Obtain these from your instructor.

The organization will also need a domain name. In a later exercise, you will install additional services (such as Domain Name Services) that rely on this name. Please use the domain name assigned by your instructor.

Please enter the following information before continuing.

Name of This Computer	serverSN
Name of Organization	IKM
Role of This Computer	Server
Network Share for Server Files	\\noz\s2003
Local Directory to store Server Files	D:\w2003x[where x represents 1, 2, 3 or 4] Ask your instructor.
Name of Installer	Administrator
Domain Name	3CLserverSN.net (e.g. 3aserver21.net)
TCP/IP Address	192.168.10.SN
TCP/IP Subnet Mask	255.255.255.0
TCP/IP Gateway	192.168.10.100

Note : SN = Station Number; CL = your class ( A or B or C )

The computers you are using have Windows XP Professional SP2 installed on Drive C: and there is space allocated on Drive D: for your installation.

After installing Windows 2003, the computer will have two operating systems installed on it. Windows XP Professional SP2 will be on Drive C: and Windows Server 2003 will be on drive D:

Beware: You are going to install Windows Server 2003 onto a computer that has an operating system installed. The disk is already partitioned. Be very careful you follow the instructions, and if unsure, ASK you lab instructor.

YOU WILL INSTALL WINDOWS SERVER 2003 INTO DRIVE D:

Step 1: Installing Windows Server 2003

1. Boot your PC using Windows Server 2003 CD.
2. Press ENTER. (To install Windows Server 2003 )

TEXT MODE SETUP PHASE
During this step, the installation process displays the partition information and allows you to select the partition on which to install Windows 2003. The files are then copied to the partition specified. Once this is finished, the computer reboots.

3. Windows Server 2003 Welcome Screen

The Welcome to Windows Setup screen will appear. Press Enter to continue.
Press ENTER to setup Windows Server 2003 on this computer.

4. Windows Server 2003 License Agreement

Read the terms of the license agreement.
If you accept (which, of course, you have to do to continue installation), press F8 to continue.

5. Windows Server 2003 Setup

You are presented with options to Setup, repair or quit.
Press ENTER to setup Windows Server 2003 on this computer.

6. Windows Server 2003 Setup: Partition List

A list of available partitions is displayed.
Highlight the D: partition (move the highlight bar using the cursor down arrow key so the highlight bar is over Drive D:)
Press ENTER to continue.

7. Partition Options

Windows 2003 setup displays a list of options, such as formatting the partition or leaving the file system intact. Highlight the option

Select "Format the partition using the NTFS file system"

then press ENTER to continue.

Wait until format finish. After finish, your PC will be automatically restart.

Press "ESC" or wait 20 second and your PC will boot from hard disk

8. Windows Server 2003 Setup: Copying Files

The files are copied from the temporary installation folder to the D: partition folder.
Once the files have been copied, the computer will restart.

GUI MODE SETUP PHASE
In this phase, the installation process continues. You are prompted using setup wizards that allow you to select components and configurations.

9. Installing Devices

Windows 2003 will automatically detect hardware devices. This process can take a few minutes so please be patient.

10. Regional and Language Options

This allows you to specify your country and your keyboard layout. By default, text input language and method is : US Keyboard layout.
If you not sure, ask your instructor.
Click Next to continue.

11. Personalize your software

Enter "Student" as the Name, "IKM" as the organization.
Click Next to continue.

12. Product Key

Enter "Product Key" as given by your instructor.
Click Next to continue.

13. Licensing Mode

Select Per Server as the licensing mode and set the number of client connections to 10.
Click Next to continue.

14. Computer Name and Administrative password

Enter the computer name given to you earlier by your instructor (serverSN). Set the administrative password to "stKm_ikm" and reconfirm password to "stKm_ikm".
Click Next to continue.

15. Date and Time Settings

Select the time zone appropriate for your location.
[(GMT+08:00) Kuala Lumpur, Singapore].
Click Next to continue.

16. Network Settings

Windows 2003 will now install the network components.
Select Custom Settings
Click Next to continue.

17. Networking Components

A list of components is presented

√	Client for Microsoft Networks
	Network Load Balancing
√	File and Printer Sharing for Microsoft Networks
√	Internet Protocol (TCP/IP)

Click Next to continue.

18. Workgroup or Computer Domain

Select No, this computer is not on a network or is on a network without a domain.
Make this computer a member of the following workgroup.

SERVER

Click Next to continue.

19. Performing Final Tasks

Please wait whilst Windows 2003 installs the start menu items, registers the components, saves the settings and removes the temporary installation files.

20. Completing the Windows 2000 Setup wizard

When finished, the computer will restart automatically.

Once the computer has restarted, logon as "Administrator". The next step will be to modify the boot-up sequence so that the computer reverts back to using Windows XP. This will allow other students to use these computers normally.

21. First time Login

When you first time login, the "Manage Your Server" dialog box will appear.

Mark the box as below to stop this dialog box displayed at logon.

√

Don't display this page at logon

Close this page to continue.

Congratulation! You have finish install the Windows Server 2003.

Summary
In this section you installed Windows Server 2003 on a computer. In the following exercises you will install Active Directory and other services, creating a small network for you to administer.

http://zcomby.googlepages.com/ http://zcomby.blogspot.com

Click untuk view / download PDF

Sejarah Penubuhan Institut Kemahiran MARA (IKM) / Kolej Kemahiran Tinggi MARA (KKTM)

IKM / KKTM diwujudkan dengan tujuan untuk melahirkan belia Bumiputera yang berkemahiran dalam pelbagai bidang teknikal dan kemahiran bagi melayakkan mereka berkhidmat dalam sektor perdagangan, perusahaan dan perindustrian disamping mewujudkan bakal-bakal usahawan.

[Read More]

Cara Buat Akaun Blog di blogspot.com

Click untuk view PDF

Zulfadli Bin Mohd Saad, Computer Technology, Department of Electronic, MARA Vocational Institute, Lumut, Perak.

[Read More]

Cara Buat Blog Sendiri

Membina blog

Click untuk view / download PDF

Zulfadli Bin Mohd Saad, Computer Technology, Department of Electronic, MARA Vocational Institute, Lumut, Perak.

[Read More]